科创达冷热设备-精工产品专业制造!

Buying elements of honeysuckle dryer

2019-12-13

When buying a honeysuckle dryer, in addition to considering the quality of the dryer and other factors. Also consider the device of honeysuckle dryer. Generally, the manufacturer is responsible for the device. No matter who it is, the following device problems should be paid attention to during the installation process.

The first is the foundation acceptance, which is mainly to check the quality and scale errors of the foundation concrete pouring. Appearance requires the bottom surface to be clean, free of oil, dust, debris, exposed steel bars, cracks and corners, no residual shells and other casting defects in the expected holes. Regarding the basic scale and azimuth errors, the following requirements should be met: The vertical and horizontal axis errors are less than 20mm when the external dimensions and basic coordinate azimuths are met. Different plane elevation angle errors are less than 20mm, only negative and negative are not allowed to be positive; slope errors are less than 20mm, the positive end is allowed to be allowed at the discharge end; the flatness of the upper plane is less than 5mm / m, and the total length is less than 10mm.

After accepting the honeysuckle dryer equipment, check the parts, components, standard parts, random documents, etc. according to the equipment packing list provided by the manufacturer to see if there are any problems, deformations and damages. Record purchases or preparations before the device. Remove the maintenance coating and dust, oil, rust, etc. during the packaging process, and check for damage caused by maintenance during transportation, loading and unloading. Pre-test and pre-assemble parts and critical accessories to avoid rework during the installation process, and to ensure the progress and quality of the device.

The preparation and installation process of the honeysuckle dryer includes basic installation procedures and safety skills requirements.

Honeysuckle dryer adopts enhanced circulation wind to perform constant temperature and humidity drying. The drying process is solidified in a microcomputer, which is highly intelligent and does not require special care.

Related News

Product Recommended

  • Sludge dewatering and...
  • Tunnel drying line
  • Split type dryer A se...
  • Drying room type drye...
  • Integrated dryer C se...
  • Dehumidifying dryer D...