科创达冷热设备-精工产品专业制造!

Advantages of energy-saving dryer

2019-11-25

1. more. Because energy-saving dryers are mainly used for processing dry products in large quantities during the flood season, we hope that the daily processing capacity of fishery products will be large. Depending on production requirements and raw materials, it can be dried into semi-dry products or fully dried products. Regardless of the dryness of the product, the so-called essence means that the flooding and drying capacity is large, the water evaporated in the drying tunnel per hour is more, and the heat of the dryer is greater.

2. Fast. From the perspective of dryer construction, it is necessary to have a simple structure. The fishing area was built and put into production that year. From a process point of view, it is required that the drying speed of the material is fast, otherwise it will cause deterioration. The flood drying machine with fast drying speed can handle a large amount of fishes per day.

3. OK. A good standard mainly means that the overall thermal efficiency of the dryer should be high, and the grip, humidity and air volume of the dryer should be easy to adjust. The meaning of the total thermal efficiency of the arch dryer includes two aspects, one is the heat It can bake to the drying tunnel per kilogram of coal, and the other is the amount of water that can be evaporated by the heat. For the sake of simplicity in production, the total thermal efficiency of the dryer can be measured by the heat utilization rate per kilogram of coal (that is, one kilogram of water can be evaporated per kilogram of coal). At present, the coal heat utilization rate of the dryer (the coal heat value is about 6,000kcal / kg) is approximately in the range of 2.4-3 kg of water / kg of coal. The overall thermal efficiency is generally low. The other aspect of the technical performance of the dryer is that according to the requirements of different types and quantities of materials to be dried, the dryer's frustration, humidity and wind t should be adjustable. Possibly uniform.

4. Province. When designing and constructing dryers, we should adapt to local conditions as much as possible, obtain materials locally, reduce investment, and occupy less farmland. Key materials, wood and other building materials should also be saved. It is required that under the same investment and building area, the drying capacity of the dryer should be large, and the regular operating cost during production should be low.

Related News

Product Recommended

  • Sludge dewatering and...
  • Tunnel drying line
  • Split type dryer A se...
  • Drying room type drye...
  • Integrated dryer C se...
  • Dehumidifying dryer D...