科创达冷热设备-精工产品专业制造!

Malfunction of chrysanthemum dryer

2020-02-11

If the temperature of the chrysanthemum dryer during the consumption process is biased, this will affect its working efficiency to a large extent. We have stopped discussing this and have three main reasons for this phenomenon:

1. The heating tube of the motor of the chrysanthemum dryer is burned out, causing the mechanical heat generated during the motor operation to not be discharged in time, which is accumulated inside the motor, which causes the temperature of the motor to increase, affecting the service life and working efficiency of the motor. Stop the machine in time and stop replacing the burned-out heating pipe, so that the working heat generated by the motor can be discharged in time.

2. The wind blades of the motor of the chrysanthemum dryer are reversed, which causes the motor to generate heat and the temperature rises from time to time, which seriously affects the normal operation of the motor. In severe cases, the motor will be burned. At this time, the power can be switched to change the position of the motor. Rotate the blades in the right direction.

3. The conductive wire of the heating tube of the motor of the chrysanthemum dryer is burned out. The conductive line of the heating tube is also a flustered original of the motor. If it is broken, the heat cannot be conducted in time, which will gradually increase the temperature of the motor. Once it exceeds The acceptance ability of the motor will break the insurance installation, which directly causes the suspension of fly ash and affects the work process of the entire consumer line. Therefore, when setting up and changing the conductive wire of the heating pipe, the staff must choose a better-quality wire to ensure chrysanthemum The dryer can work safely and stably.

Finding the reason why the chrysanthemum dryer is unstable in temperature is actually very simple. You can easily find it just by starting from the above three aspects. Now that we have found the reason why the temperature of the dryer appears to be high or low, we need to be targeted and thoroughly deal with this problem from the source, so that we will not suffer from such annoyance in the future. As long as the dryer reaches the proper temperature during operation, it can reach the ideal boring effect and improve work efficiency.

åˆ † ä½ “åž‹ 烘干机Aç³ »åˆ—

Related News

Product Recommended

  • Sludge dewatering and...
  • Tunnel drying line
  • Split type dryer A se...
  • Drying room type drye...
  • Integrated dryer C se...
  • Dehumidifying dryer D...