科创达冷热设备-精工产品专业制造!

Orange red dryer drying process

2019-12-25

Orange red dryer processing technology, through different knife method, rope method, rolling method, softening method, drying method, filling method, can make beautiful and useful, medicinal effect of orange red silk, thin sheet, five claws, seven Medicines such as claws and handicrafts such as cigarette cases, cups and pipes, and these handicrafts also have outstanding medicinal effects.

Tableting: The moistened medicinal material is flattened twice with a rolling machine, and the thickness of a tablet is about 7 to 8 mm, and the tablet is air-dried for about 3 hours to perform a second tabletting. The thickness of the second tablet was about 3 to 5 mm.

Shred: Use a chop-knife medicine cutter to cut into shreds with a thickness of 3 to 5 mm.

Drying: Dry in a drying room. The thickness of each layer is controlled at 2cm ~ 3cm (after slicing). Each material cart is placed 12-14 layers. The drying temperature is controlled at 55 ~ 60 ℃. The drying time is about 30 ~ During 36 hours, continuous dehumidification is performed during the drying process, and the water content is dried to 12%. During the drying process, the temperature is controlled, and the polymer chains in the orange-red pieces are loosened by controlling the temperature. The boiling water is simply dipped out, and the leaching rate is above 95%. If the whole drying process is carried out, it is differentiated according to the size, and the drying time of each batch is about 4 days.

Picking: Because a lot of orange shavings remain during the drying process, use a sieve to remove the shavings.

Packaging: 10 bags are taken every two hours from the start of packaging to check the difference in the amount of each bag. The difference in the amount of each bag must meet the requirements (0 to 0.4%).

The company is committed to the development and production of PAKA air-energy heat pump water heaters and PAKA heat pump drying units, which are highly efficient, energy-saving, environmentally friendly. PAKA air-energy products are known for their advanced systems, rigorous materials selection, exquisite workmanship, excellent quality, and high efficiency and energy saving. Less than 1%, the product life is more than 8 years, the annual maintenance cost is only 1-2% of the cost, and the operating cost is extremely low. This is the result of the professional and professional production of science and technology.

Related News

Product Recommended

  • Sludge dewatering and...
  • Tunnel drying line
  • Split type dryer A se...
  • Drying room type drye...
  • Integrated dryer C se...
  • Dehumidifying dryer D...